This site uses cookies to bring you the best experience. Find out more
Skip to main content

Fire Strip


INTUMESCENT STRIPS

Intumescent fire and smoke seals are an intumescent, graphite-based fire seal for fire door assemblies. In the event of a fire the seal expands (intumesces) to many times its original volume and seals the gap around the door to provide a safe and effective barrier against the passage of fire, smoke and hot gases. Contained within a PVC sleeve, the strip is fitted into a rebate to either the leaves or the frame of a door. All fire and smoke seals are supplied with a self-adhesive backing tape to facilitate quick and easy fitting and are available in 10 colours.

Benefits:

  • Tested for 30 minutes with 10mm and 15mm to BS 476 part 22 & 31.1
  • Tested for 60 minutes with 20mm 25mm and 30mm to BS 476 part 22 & 31.1
  • Smoke seals tested to EN1634-3
  • Tested to 100,000 open/close cycles
  • Certifire approved fire seals & smoke seals
  • Passed at BS476 part 22 & 31.1
  • Smoke seals to EN1634-3
  • 30- or 60-minute rated types
  • Available in 10 colours
  • All seals available in a pre-pack containing 2x2.1m and 1x1.05m lengths complete with fitting instructions
  • All seals are supplied with self-adhesive backing tape
  • Standard brush pile length 6mm

Fire Only Strip:

Intumescent seals for use where no smoke sealing is required. Mainly used on FD30 and FD60 doors. Seals do not have smoke rating and have only been fire tested.

  • Certifire approved
  • Fire only tested
  • Passed at BS476 Part 22
  • 30 or 60 minute rated types
  • 10, 15, 20 or 25mm widths available / 4mm depth *25mm in brown or white finish only

Single Blade Strip:

Intumescent fire seal with a black Neoprene single blade smoke seal. Seals can be wiped clean in hygienic environments.

  • Certifire approved
  • Passed at BS476 Part 22 & 31.1
  • 30 or 60 minute rated types
  • 10, 15, 20 or 25mm widths available / 4mm depth *25mm in brown or white finish only

Twin Blade Strip:

Intumescent fire seal with a black Neoprene twin blade smoke seal. Seals can be wiped clean in hygienic environments. Note: there is no difference between twin blade or single it is based on user preference.

  • Certifire approved
  • Passed at BS476 Part 22 & 31.1
  • 30 or 60 minute rated types
  • 10, 15, 20 or 25mm* widths available
  • 4mm depth *25mm in brown or white finish only

Fire & Smoke Brush Strip:

Intumescent fire and smoke brush seal for a safe and effective barrier against fire, cold smoke and hot gases. Standard brush pile length 6mm.

  • Certifire approved
  • Passed at BS476 Part 22 & 31.1
  • Smoke seals to EN1634-3
  • 30 or 60 minute rated types
  • 10, 15, 20 or 25mm widths available / 4mm depth *25mm in brown or white finish only

 


QUAD SEAL - FOUR SEALS IN ONE!

The Quad Seal system is an intumescent fire, smoke, acoustic and thermal seal for fire door assemblies. The complete solution for fire, smoke, acoustic & thermal containment. Quad Seal is an intumescent (graphite based) fire seal combined with a Schlegel Aquamac smoke, acoustic & thermal seal contained within a PVC sleeve that is fitted into a rebate to either the fire door leaves or frame.

  • Certifire approved
  • BS476 Part 22 & 31.1
  • BS EN ISO 140-3
  • 30- or 60-minute rated types
  • Smoke seal to 100,000 cycle test
  • Meets approved document B, E, & L
  • Four popular sizes


ACOUSTIC & SMOKE PERIMETER (ASP & ASPTF) SEALS

ASP Seals:

The ASP is a co-extruded PVC, acoustic and smoke perimeter self-adhesive seal. This is used in conjunction with previously installed ‘fire only’ intumescent strip so that the doors can then be additionally acoustic and smoke approved. The seals are fitted in the protected corners of rebated door frames. Acoustically and smoke tested on proprietary fire doors.

  • Noise reduction index up to Rw 39dB*
  • Rigid legs with a flexible hinged corner makes for easy fitting
  • Excellent compression and deflection performance
  • Low closing forces due to low co-efficient material used

ASPTF Seals:

The ASPTF Twin Fin Seal is a compact design ideal for hygiene and clean rooms and removes the need to fit separate smoke seals. The twin flame should be used as an alternative to the ASP seal when space is limited as it avoids overlapping any other door ironmongery. Acoustically and smoke tested on proprietary fire doors.

  • Noise reduction index up to Rw 35dB*
  • Engineered to size to avoid overlapping door ironmongery
  • Excellent compression and deflection performance
  • Allows reduced door closing force due to a low co-efficient material used in integral fins

Our Acoustic & Smoke Perimeter seal should be used in conjunction with a rebated, semi morticed or surface mounted door bottom seal and where required acoustic & disabled access threshold seal.